Press Release: The Bushmaster Unicorn, Also Known as ACR Caliber Conversions Do They Really Exist?

Unicorn Sasquach Patch

The Bushmaster Unicorn, Also Known as ACR Caliber Conversions

Do They Really Exist?

Huntsville, AL – The Bushmaster ACR was brought to market in 2010 with the promise of unparalleled adaptability. The concept was simple; an extremely reliable, versatile, and modular platform, capable of tool-less configuration and caliber changes in minutes by swapping the bolt head, barrel and magazine. Unfortunately, much like a mythical creature, the caliber conversions have never been seen. Until now.

Finally, after many years of development, we are excited to announce the first of many new caliber conversions for the ACR. With fully ambidextrous controls, improved ergonomics, an ultra reliable gas piston operating system, and tool-less configuration and caliber adaptability, the ACR is now the most field adaptable Modern Sporting Rifle Platform available.

clip_image002

.450 Bushmaster Conversion

Ultimate stopping power for deer, bear or feral hogs

clip_image004

6.8 Rem SPC II

For increased energy and down-range performance

Product Specifications

Product

Order #

Barrel

Magazine Capacity

2018 MSRP

16” .450 BM

ACR Conversion

90023

16” FNC Treated 4150 CMV, 1 X 24 Twist

5 Round Polymer

$699

18.5” .450 BM ACR Conversion

90024

18.5” FNC Treated 4150 CMV, 1 X 24 Twist

5 Round Polymer

$699

16” 6.8 SPC II ACR Conversion

90028

16” FNC Treated 4150 CMV, 1 X 11 Twist

25 Round

$699


ACR Beauty Shot



###

About Bushmaster Firearms International

Bushmaster Firearms International (“BFI”) is one of the world’s leading manufacturers of small-frame, AR-pattern firearms, as well as other firearm platforms and accessories. Its headquarters is in Madison, North Carolina, and its primary place of manufacture is Huntsville, Alabama. Its products are sold to civilian and government end users in the United States as well as over fifty countries around the world. Visit our web site at www.bushmaster.com.

Follow Bushmaster!  FacebookTwitter

Video: Troy Tomahawk Stock Kit

Troy Stock

Yeah… I am just going to go ahead and disable the comments on this video.

I had fun making it and I clearly need to replace that EOtech since it only worked when I wasn’t moving but outside of that go check out the stock.

https://troyind.com/products/stock-to…

********

Follow Me Here For all our Updates!
Gears of Guns Blog: http://Gearsofguns.com
Gearsofguns YouTube Channel : https://YouTube.com/TheGearsofGunsblog
Gears of Guns Reviews: http://gearsofguns.com/product-reviews/
Find us on Facebook: http://www.facebook.com/Gearsofguns
Find us on Twitter: http://twitter.com/gearsofguns
Find us on Instagram: https://www.instagram.com/gearsofguns/
We are also on Pinterest: https://www.pinterest.com/gearsofguns/

Video: The Guns We Use From 10 To 50 Yards on Our AR500 Steel Plate From MK Machining

MK Machining

 

Before we get to the review of the plate and the video, I would like to share the chance for you to get some free steel of your very own from MK Machining. Shoot Selly@rankmediaagency.com an email and let them know Atticus sent you!

 

First I would like to say thank you to MK Machining for shipping us out this 66% IPSC AR500 3/8” thick steel plate for this review.

 

 

As most of you know, I prefer to shoot steel while I am reviewing guns so you can hear the hits. Rather than trying to publish an “ad” for MK Machining, I wanted to share the guns that we like to shoot from 10 to 50 yards at the steel.

Champion

I like to base all of my AR500 3/8 thick steel safety against this instruction list right here.

This list is the bible when it comes to shooting this steel. It clearly out-lines what you shouldn’t do.

8. 3/8” thick targets are intended for use with handgun, rifle, and supersonic rimfire cartridges as well as shotgun birdshot, buckshot and slugs only at appropriate distances described below.
9. 15 yards is the minimum shooting distance when using non-magnum class handgun, supersonic .22LR rimfire, and shotgun birdshot ammunition.
10. 25 yards is the minimum shooting distance when using shotgun buckshot.
11. 50 yards is the minimum shooting distance when using magnum class handgun ammunition, and shotgun slugs.
12. 100 yards is the minimum shooting distance when using standard rifle ammunition under 2,500 fps upon impact and less than 3000 ft/lb of energy upon impact.
13. 250 yards is the minimum shooting distance when using magnum class rifle ammunition under 2,500 fps upon impact and less than 3000 ft/lb of energy upon impact.

 

 

 

As you can see in the video, we shoot everything from .22LR up to .300BLK and 7.62x39mm at a safe distance. I also said in the video that 5.56/.223 is a 100 yard minimum safe distance round and when it comes to my .308s and the long barrels even that can be 150-200 yard for safe shooting.

 

AR500 is a common steel and a great thing to have on your range and you can find it from great manufactures like MKMachining.com.

 

Steel can be dangerous but with the right guidelines and proper care, steel can be your greatest shooting ally.

 

 

Steel after shooting from 10-50 yards

Video: CMMG Build Part 2 – If You Flip the Brace it Becomes a Shark!

CMMG Build 2 Cover

I was not paid to talk about the Pro For Sho ear muffs. I am just some who loves earpro

https://amzn.to/2GyDEUm

Parts list:

CMMG Upper and Lower pistol kit
CMMG 12.5” Barrel
KAK Shockwave Brace

Phase 5:
15″ Lo-Pro Slope Nose (LPSN15) Free Float Quad Rail
Ambidextrous Battle Latch \ Charging Handle Assembly (ABL/CHA)

Strike Industries:
SI AR STEEL GAS BLOCK
SI Dust Cover
Chrome AR FORWARD ASSIST
M4 AR 15 CHARGING HANDLE

Hexmag series 2 mags
Hexmag Grips

WMD BCG
Nickel boron

********

Follow Me Here For all our Updates!
Gears of Guns Blog: http://Gearsofguns.com
Gearsofguns YouTube Channel : https://YouTube.com/TheGearsofGunsblog
Gears of Guns Reviews: http://gearsofguns.com/product-reviews/
Find us on Facebook: http://www.facebook.com/Gearsofguns
Find us on Twitter: http://twitter.com/gearsofguns
Find us on Instagram: https://www.instagram.com/gearsofguns/
We are also on Pinterest: https://www.pinterest.com/gearsofguns/

Video: Remington 700 SPS W/ AAC SR7 Suppressor – I Would Call This Movie Quiet…

First look Rem700

I really love this .300 AAC Blackout Remington 700 SPS rifle. I had planned on mounting a Nikon .300 Blackout scope on this rifle but I think the Vanguard ENDEAVOR RS IV 1.5-6X42 scope just ended up being the best scope for this package.

One thing I have failed to mention in any of the videos thus far on this rifle is that I should have gotten a full length rail. while this set up works great for this scope I could not mount my thermals onto this rifle. The rifle has some heft to it while means with that  .30 Caliber round it is going to stay true and on target.

Video: S&W M&P M2.0 45 Threaded First Look – The Atticus makes weird faces when focusing video

M2.0 cover

I have no idea what Atticus did to mess up the footage so badly but he did and now we are paying the price. Everyone needs to comment and tell him to get is act together so we don’t have to look at grainy footage. BE NICE or you will have your comment deleted.

Follow Me Here For all our Updates!
Gears of Guns Blog: http://Gearsofguns.com
Gearsofguns YouTube Channel : https://YouTube.com/TheGearsofGunsblog
Gears of Guns Reviews: http://gearsofguns.com/product-reviews/
Find us on Facebook: http://www.facebook.com/Gearsofguns
Find us on Twitter: http://twitter.com/gearsofguns
Find us on Instagram: https://www.instagram.com/gearsofguns/
We are also on Pinterest: https://www.pinterest.com/gearsofguns/

Press Release: ETS Group Releases MP5 9mm Clear Polymer Magazines

ETS Logo

July 25, 2016: The ETS Group is proud to announce the release of their new line of made in the USA, H&K® MP5 9mm clear polymer magazines. Starting at $39.99, there are four models available:

· HKMP5-10 10 Rounds $39.99

· HKMP5-20 20 Rounds $39.99

· HKMP5-30 30 Rounds $39.99

· HKMP5-40 40 Rounds $44.99

HKMP5-30 LOADEDHKMP5-40 LOADED

TYG_4006

TYG_4011

TYG_4013

TYG_4016

Compatible with all MP5 Style 9mm firearms such as HK MP5, MP5K, HK94, SP89, SP5K, Zenith, MKE, Omega, POF, HK Contract MP5 9mm Variants, MP5 style SW5, BW5, CA94, D54, V94, clones or other custom builds.

The ETS Group MP5 clear polymer magazines are optimized to run hollow points and provide the same reliability you’ve come to expect from standard H&K® magazines. Their translucent body structure allows you to easily see your ammo count and type, while its durable construction features extreme impact-resistance so they won’t crack when dropped and the feed lips won’t spread when fully loaded and stored. Furthermore, the ETS Group offers a lifetime warranty on all magazines!

Features

· Optimized to run hollow points

· Same reliability you’ve come to expect from H&K® magazines

· Translucent body—allowing you to see your ammo count and type

· Extreme impact resistance—won’t crack or break when dropped

· Very resistant to harsh chemicals

· Superior heat, cold and UV resistance—won’t become brittle over time, even when exposed to harsh environments or extreme cold

· Creep resistant—the feedlips and body won’t spread when being stored long term, even when fully loaded

· Far lighter than steel magazines

· Fits standard MP5 mag pouches and couplers

· Lifetime Warranty


To see ETS’s full line of MP5 magazines, visit www.etsgroup.us.

About ETS Group

Established in 2014, Elite Tactical Systems Group’s (ETS) goal is to provide customers with innovative products by utilizing cutting-edge design, materials, and manufacturing processes to create the best, most rugged, clear polymer magazines. We are proud to offer durable, top-quality, American-made products built to withstand the rigors of combat and heavy-duty use.

Press Release: CMMG Releases The Mk57 GUARD chambered in FN 5.7×28

unnamed

Boonville, MO (7-24-18) – CMMG has announced the release of a new line of AR pistols and short-barreled rifles (SBR’s) chambered in FN 5.7x28mm. Available in 5-inch barreled BANSHEE and 8-inch barreled PSB configurations, each model in the new Mk57 GUARD line is fed from FN 5.7 pistol magazines and uses CMMG’s patent-pending Radial Delayed Blowback operating system.

“The 5.7 is an intriguing round that is perhaps best known for its relatively lightweight bullet design and impressive velocities. From an engineering perspective, we were excited to pair the 5.7 with our Radial Delayed Blowback system. I think it’s safe to say that this combination makes the Mk57 one of the lightest recoiling pistol caliber carbines on the market,” said Chris Reinkemeyer, CEO of CMMG.

At the heart of the Mk57 is CMMG’s Radial Delayed Blowback operating system designed to minimize felt recoil. It features rotating bolt that requires the recoil impulse of a round being fired in order to unlock. As each round is fired, a portion of the rearward force is exhausted in unlocking this bolt prior to driving the carrier rearward and cycling the action. With less rearward force to compensate for, CMMG is able to use a lighter carrier and buffer than a standard blowback design would allow, thus reducing the overall reciprocating mass.

CMMG will also offer a separate lightweight buffer for use with subsonic ammunition. To overcome the reduced backpressure with subsonic loads, the lightweight buffer can help ensure that the bolt locks back after firing the last round.

The FN 5.7×28 was designed and introduced by FN Herstal with the intention of replacing the 9mm for military and law enforcement usage. While the caliber has been adopted by several agencies throughout the world, its real success came with its entry into the civilian market in the early 2000’s.

Mk57 BANSHEE

The BANSHEE in 5.7×28 has a 5-inch barrel and comes as either an SBR or an AR pistol. The SBR version is sold with Magpul Moe vertical foregrip and features CMMG’s new RipStock. The Ripstock allows users to quickly deploy the stock to an extended position without having to actuate a release lever. It also has five set-screw positions that allow users to customize the length of extension to the best fit. The AR pistol versions come with a Gear Head Works Tailhook Mod2 brace that allows users to easily extend/collapse the brace with the press of a button.

Distinguishing features of the BANSHEE also include the addition of CMMG’s new ambidextrous charging handle and RML4 M-LOK hand guard. A CMMG Premier Cerakote finish (11 different colors to choose from) is included standard with each BANSHEE. It ships with one 20-round ProMag magazine and is compatible with FN Five-SeveN pistol magazines.

Mk57 BANSHEE 5.7x28mm SBR

BARREL: 5″ MT 4140CM SBN, 1:9 Twist

MUZZLE: Thread Protector, Threaded ½-28

BCG WEIGHT: 9.9 oz.

HAND GUARD: CMMG RML4

FURNITURE: Magpul MOE Pistol Grip, Compact Receiver Extension, CMMG RipStock, Magpul MVG Foregrip, Fully Ambidextrous Sling Plate, Selector, and Charging Handle

RECEIVERS: Billet 7075-T6 AL Lower, Forged 7075-T6 AL Upper

TRIGGER: CMMG Single Stage Mil-Spec

MAGAZINE: 20-round ProMag

WEIGHT: 4.6 lbs (Unloaded)

LENGTH: 21.75″ (STOCK EXTENDED) 18.5” (STOCK COLLAPSED)

MSRP: $1,549.95

Mk57 BANSHEE 5.7x28mm Pistol

BARREL: 5″ MT 4140CM SBN, 1:9 Twist

MUZZLE: Thread Protector, Threaded ½-28

BCG WEIGHT: 9.9 oz.

HAND GUARD: CMMG RML4

FURNITURE: Magpul MOE Pistol Grip, Gear Head Works Tailhook Mod 2 Brace, Fully Ambidextrous Sling Plate, Selector, and Charging Handle

RECEIVERS: Billet 7075-T6 AL Lower, Forged 7075-T6 AL Upper

TRIGGER: CMMG Single Stage Mil-Spec

MAGAZINE: 20-round ProMag

WEIGHT: 4.7 lbs (Unloaded)

LENGTH: 21.75″ (STOCK EXTENDED) 18.5” (STOCK COLLAPSED)

MSRP: $1,549.95

Mk57 PSB

The Mk57 PSB Pistol includes an 8-inch barrel and a KAK Shockwave Brace. It also sports a CMMG RML7 M-LOK hand guard and CMMG A2 Compensator. It ships with one 20-round ProMag magazine and is compatible with FN Five-SeveN pistol magazines.

Mk57 PSB 5.7x28mm Pistol

BARREL: 8″ MT 4140CM SBN, 1:9 Twist

MUZZLE: CMMG A2 Compensator, Threaded ½-28

BCG WEIGHT: 9.9 oz.

HAND GUARD: CMMG RML7

FURNITURE: Magpul MOE Pistol Grip, KAK Shockwave Stabilizer and Brace

RECEIVERS: Billet 7075-T6 AL Lower, Forged 7075-T6 AL Upper

TRIGGER: CMMG Single Stage Mil-Spec

MAGAZINE: 20-round ProMag

WEIGHT: 5 lbs (Unloaded)

LENGTH: 25”

MSRP: $1,399.95

Mk57 Pistol

The Mk57 Pistol includes an 8-inch barrel and sports a CMMG RML7 M-LOK hand guard and CMMG A2 Compensator. It ships with one 20-round ProMag magazine and is compatible with FN Five-SeveN pistol magazines.

Mk57 PSB 5.7x28mm Pistol

BARREL: 8″ MT 4140CM SBN, 1:9 Twist

MUZZLE: CMMG A2 Compensator, Threaded ½-28

BCG WEIGHT: 9.9 oz.

HAND GUARD: CMMG RML7

FURNITURE: Magpul MOE Pistol Grip

RECEIVERS: Billet 7075-T6 AL Lower, Forged 7075-T6 AL Upper

TRIGGER: CMMG Single Stage Mil-Spec

MAGAZINE: 20-round ProMag

WEIGHT: 5 lbs (Unloaded)

LENGTH: 25”

MSRP: $1,349.95

CMMG RipStock

Included on each BANSHEE SBR, CMMG’s RipStock is a revolutionary, retractable buttstock engineered for lightning-fast deployment to your personal setting. With Fastback Technology, simply pull straight back to extend the stock. No locking tabs to bind. P3 Technology (Personal Position Preset) allows users to adjust the indexing screw and to set your own preset.  MSRP is $199.95.

CMMG Ambidextrous Charging Handle

CMMG’s new ambidextrous charging handle is included on each model of BANSHEE and is designed to improve the operation of your AR. Gross motor skill operation, gloved operation, or just trying to get ahold of your latch with an optic mounted are greatly improved by our larger latch design. The ambidextrous latch allows for easy operation no matter which hand you use to charge the weapon. Sizes available for your AR15, AR10, Mk47 and MkW platforms. Made of 7075 Aluminum and backed by our CMMG Lifetime Quality Guarantee. MSRP’s range from $79.95 to $99.95.

Suggested Keywords/Tags:

CMMG Lifetime Quality Guarantee

CMMG, Inc. will guarantee its products against defects in material or workmanship. CMMG, Inc. will repair, replace or substitute part(s) (at CMMG, Inc. discretion) at no charge to the customer if a defect of material or workmanship is found. All service work must be carried out by CMMG, Inc.

About CMMG:

CMMG began in central Missouri in 2002 and quickly developed into a full-time business because of its group of knowledgeable and passionate firearms enthusiasts committed to quality and service. Its reputation was built on attention to detail, cutting edge innovation and the superior craftsmanship that comes from sourcing all their own parts. By offering high quality AR rifles, parts and accessories, CMMG’s commitment to top-quality products and professional service is as deep today as it was when it began.

For more information, please visit:

www.cmmginc.com.

https://www.facebook.com/CMMGInc

https://www.youtube.com/cmmg

Press Release: High Speed Gear® adds Comp-Tac Victory GearTM to its Wide Range of Product Offerings.

High Speed Gear is dedicated to building the best 100% Made in the USA, Battle-Proven Tactical GearTM.

HSGI logo

CT GY Patch Art NEW (1)

Swansboro, NC (April 2018). High Speed Gear makers of the patented TACO® line as well as the full line of Sure-Grip® & Slim-Grip® Battle Belts; Pouches; Packs; and Polymers has acquired Comp-TacTM, of Houston Texas.

Comp-TacTM develops and manufactures a full line of Kydex Holsters – Tactical, Competition, Concealed Carry (Appendix, IWB and OWB), Hybrid (Kydex and leather), Revolver, as well has Holsters designed specifically for women; including holsters for firearms with lights or lasers. In addition to the full line of Holsters, Comp-Tac provides great Kydex solutions for Magazine Pouches. Product line can be seen at www.comp-tac.com.

Comp-Tac has been well received into the Holster community since 2000 and provides high quality gun belts in both Leather and Nylon, IDPA Targets and Pasters, as well as the Armadillo ConcealmentTM vests.

“The Comp-Tac line of products truly is a perfect add on to the High Speed Gear line! These holsters work seamlessly with the HSGI line and mirrors the quality and innovation that HSGI is known for,” states Bill Babboni, VP of Sales and Operations. “HSGI is dedicated to increasing our offerings of products that are known for their functionality as well as quality. While Comp-Tac’s design, manufacturing, support and distribution will remain in their current location in Houston, TX; High Speed Gear is in the process of breaking ground on an additional two-story distribution facility in Swansboro, NC to increase our capabilities and meet the world-wide demand for our products.”

As High Speed Gear and Comp-Tac continue to expand, we welcome all inquiries: sales@highspeedgear.com.

High Speed Gear would like to thank Dev Warren, of the Ascendant Advisory Group, and his team for all their assistance and guidance during entire acquisition process.

About High Speed Gear

Print

High Speed Gear is dedicated to building the best 100% Made in the USA, Battle-Proven Tactical Gear. Our products are designed for the highest level of comfort, functionality, and versatility. Satisfaction is guaranteed for all of our customers, whether military, law enforcement or responsibly armed citizens. Our products are user driven and are designed based on the operational experiences of a wide variety of end users.