SHOT SHOW 2017: Industry Day at the Range Video

SHOT Show stands for Shooting Hunting Outdoor Trade Show, it is held at the Sands Convention Center at the Venetian Hotel and Casino in Las Vegas NV, USA. It is a private INDUSTRY ONLY show. As media, we are invited to come out and see all the new firearms in the Industry so we may bring you the viewer new content.  This video is from Industry Day, also known as Media Day.  This is our “first day” where we get to shoot all different firearms, ammo, accessories, etc.  It is a really fun day to try many different types of firearms from skeet shooting to full auto.  Tomorrow starts the first official day of the trade show.

Video: Ritter and Stark

Ritter and Stark SX-1

I like this rifle. I have been in contact with Ritter and Stark and I have told them I want to see this rifle in the American market because of how awesome it is!

I am on a caliber conversion kick right now with the #WindhamProject, so the Ritter & Stark: SX-1 MTR Modular Tactical Rifle has really tickled my fancy.

This promo video below is making me drool.

This is just a thought of mine and not something I have talked about with them but it would be cool to see a platform like this that runs the .308, .300 Win Mag and the .338 Lapua but has the ability to be upgraded to .50BMG or .408 Cheytac. (The Ritter and Stark SX-1 does not do this)

If you haven’t caught our Name this Gun post where we talk about it you can check it out here:
Name This Gun: 7-13-16 Answer SX-1 MTR

 

Otis Technology Elite Cleaning System Review

I have this weird need to collect cleaning kits. It isn’t because I need 7 identical  12 gauge brushes or because I am lacking in the cleaning rod or cleaning cable department. It seems everyone has their own take on what a shooter needs to help them achieve the best clean possible and I like to see what the differences are. Most companies send out their version of oil and cleaner or even just CLP. However, so far, as much as I am willing to try new types of cleaners or CLPs I do favor my M-Pro7 32oz spray for cleaning.

 FG-1000_facing_left_Large_Multi-Large

Specs

– Over 40 firearm-specific cleaning components in a nylon case
– Six (6) Memory-Flex® Cables of varying length for effective and correct Breech-to-Muzzle® cleaning
– Twenty-two (22) bronze bore brushes to remove copper deposits and other fouling
– Obstruction removal tools for jammed cases and other blockages
– Specialized precision tools for complete breakdown and fine cleaning of all critical and hard to reach areas of your firearm
– Optics cleaning gear for care and maintenance of scopes, rangefinders and more
– Removable Tactical Cleaning System (Item # FG-750) for convenient carrying in the field
– Dimensions: 15 1/4″ x 8 3/4″ x 4 1/2″

The Brushes

As you can see in the picture above the main kit comes 14 different caliber brushes for just about every caliber you might need.

  1. 22 (.204 thru .222)
  2. 25 (.223 thru 6.5)
  3. 27 (.270 thru 7mm)
  4. 30 (.30 thru 8mm)
  5. 35 (.338 thru .357)
  6. 38 (.370 thru 9.3mm)
  7. 40 (.40 thru 10.75mm)
  8. 45 (.44 thru .458)
  9. 50 .50 thru 12.9mm)
  10. .410 GA Shotgun
  11. 28 GA Shotgun
  12. 20 GA Shotgun
  13. 16 GA Shotgun
  14. 12/10 GA Shotgun (
  15. .17 caliber short brush (rifle/pistol/air rifle)
  16. .22 caliber Short brush (rifle/pistol/air rifle)

The other six brushes are found in the removable tactical cleaning system

For me, this means I can clean all of my firearms and my friends and family can use this kit to clean theirs too.

Other brushes:  It comes with a nylon brush that I like to use in addition to gun cleaning as my travel tooth brush and beard comb. I have found that a hit of rem oil really gets the teeth pearly white and the beard soft and shiny (No!  Seriously,  I promise I am NOT stupid enough to believe that I can use gun cleaning gear to brush my teeth or comb my beard! Just joking! You will harm yourself if you try this).

The Other Nougaty Stuff and Things

Otis ships this kit with carbon scrapers, 3 tubes of CLP, lens cleaners, patches for all calibers, cleaning parts for air guns and even a chamber brush for your ARs.

This kit doesn’t come with a brass cleaning rod but rather cleaning cables.  I admit to having days I like them and days I don’t.

Removable Tactical Cleaning System

– 8″, 30″ and 34″ Memory-Flex® Cables for effective and correct Breech-to-Muzzle® cleaning
– Six (6) firearm-specific bronze bore brushes to remove copper deposits and other fouling
– Lightweight soft pack case with belt loop for convenient carrying
– T-handle and obstruction removal tools for jammed cases and other blockages
– Redesigned component holder secures and protects brushes and components
– Dimensions: 4″ x 4″ x 2 1/2″

The 6 brushes that come with this kit are 12/10 Gauge, .22 cal, .27 cal, .45, .38, and .30.

I think I would rather is be a MOLLE pouch but I am sure there is a good reason it isn’t. (I’ll ask at SHOT 2016)

Overall Thoughts 

The Otis Technology Elite Cleaning System retails for $99 Amazon. This kit is really nice in the brush department but I would have liked to have seen their AR BCM cleaning tool they call the B.O.N.E.® TOOL. They make them for both 5.56 and 7.62 bolts.

As I said earlier, I use this with M-Pro 7 cleaner and oil because I find it works best for me.

The Otis Technology Elite Cleaning System is great if you are looking for an all caliber in one kit. Everyone with more than one caliber collection should have one. This kits is a must for collectors, gun ranges, firearm instructors, etc.

If you are someone who stays in the 3 or 4 caliber range ( 9mm, .45, .22 and .30 caliber or what ever it might be) this kit might be overkill but if you know you are going to be branching out and getting into the revolver or big bore game or even just into the Shotgun game this kits is GREAT!

My only two comments, or wish list about what I would like to see changed or added is the BONE tool and the removable kit upgraded to MOLLE.

Editorial: Standardizing vs. Proprietary

A few weeks back I reviewed a Windham Weaponry .308 AR style rifle. When I finished the review I contacted my local gunsmith as well as Windham and asked if they knew of any standardization in the .308 AR market.  I wanted to know if anyone had made a pattern for the upper and lower as well as the Bolt Carrier Group (BCG).

standard vs proprietary

The question seemed straight forward, however the answer isn’t. Long story short, no. No one has made a standard to which everyone is following.

(Note: I am using the 5.56×45 and the .223 Remington interchangeably in the article even though they are not the same cartridge.  AR stands for Armalite Rifle not Assault Rifle).

History

In 1955 and 1956 Armalite designed the first prototypes of the original AR-10 chambered in the 7.62×51 (.308 Winchester.)  By 1957, the first AR-15 using the intermediate cartridge 5.56×45 NATO was designed and then sold to Colt due to financial problems that Armalite was having.

Is Anything New Anymore?

Since the AR-10 was designed before the AR-15 it would seem we haven’t taken a step forward but a step back in time. Thanks to Government bans, such as the 1994 Assault Weapon Ban that ended in 2004 and other set backs, the modern sporting rifle world has been trying to play catch up for the past 11 years.

Intermediate vs. Rifle Cartridges

I have never really been a fan of the .223 Remington (5.56x45NATO) and I know I am not alone in this distaste. I have always liked the 7.62x39mm or the newer .300 AAC Blackout when it comes to intermediate cartridges. The .308 win is a rifle cartridge that fits more than just the distance shooting bill. The fact of the matter is that the .308 and the 5.56 have been on the battle field for almost the same amount of time and yet we chose the less ballistically versatile round for civilian and military applications.

DPMS/SR-25 Magazines vs. Proprietary

When building a new firearm platform you have to consider the way your firearm is going to hold rounds. In the the bolt action world we typically use an in-stock style magazine, for the lever actions and shotguns we use a tube and elevator (shell carrier) system, for the semi and full autos we have a choice. Belt fed (seen mainly in past in full auto only but is making it way back in semi auto versions of full auto machine guns) or magazine fed.

The .308 ARs are all based on the smaller AR-15, so you would think after seeing the success of the AR-15 magazine market it would be smarter to stick with what works. But we are still in a relearning stage in the firearm world about supply and demand. The FN SCAR 17 uses a proprietary .308 mag but the SCAR 16 uses STANAG (AR-15 style magazines). When FN released the SCAR 17 to the general population they had problems keeping magazines in stock because they were trying to keep the military contracts filled and just they couldn’t keep up with demand. That’s a problem with proprietary.

The DPMS/SR-25 style magazines are now being made by a number of different magazine manufacturers which means I can order as many as I want.

Standardizing

The AR-15 is known as the Legos for adults. Everything is changeable. If I want a nickel boron BCG I can find a company I like and replace mine in my AR-15.  If I want a new charging handle I get one. If I want to put a .50BMG bolt action upper on my lower I can. This seems to me like a great idea. However in the .308 AR world we have yet to reach an agreement as to what the specs should be.

Final thoughts

Until they all come to an agreement about standardizing, the consumer market for the .308 AR is left with fewer options.  To me, more options means more money back in the pockets of the firearm manufacturers.  More money to the manufacturers means more money can be spent on R&D, which means more advanced guns in the future.

Video: Jerry Miculek shooting 1000 yards with a Barrett .50BMG in 2 seconds

Jerry Miculek is fun to watch. He is always trying to make cool trick shots that are just incredible feats. I had to watch this video twice to understand what happened. He was using the balloon as an aiming point and not as a target. The reason for the balloon popping is the splatter from the .50 hitting the steel plate. I am fascinated by how people are pushing the envelope of what people thought was possible.

Magpul dynamics is teaching people to take .308, which we thought to only have a max effective yardage out to 800-1000 yard and they are pushing them out to 1200+. For those of you who believe you can take this shot with ease like he did, I challenge you to pull off his 9mm revolver stunt and hit the steel plate at 1000 yards.

 

Aaron–SHTF 20 AR-15 Upper

The SHTF 50 is a single shot bolt action upper conversion that is able to fit any mil-spec M16/AR15 style rifle. This Upper, made by Safety Harbor, essentially turns a pea shooter into a cannon.

shtf50-18exactorail

The kit comes with 3 barrel lengths: 18″, 22″, and 29″. This conversion system only comes with the upper. This can add a significant amount of weigh to the over all firearm but obviously increase its range.  

shtf50-3lengths

There are many types of .50 caliber rounds that this is able to fire including the .50 caliber Beowolf and the .50 BMG. This upper still allows it it be magazine fed from the left side at the action. The SHTF 50 kit comes with a heavier hammer, new spring, and a new firing pen. You have the choice to choose between standard high, low, 20 MOA and the eXacto rails on top of the upper you purchase and also included standard rail on the bottom.

scope  rails

SPECIFICATIONS:
Receiver: Machined 4130 Chomemoly Steel
Muzzle break: 8 port break, threaded to muzzle
Bolt head: 2 lug, machined 4340 Chromemoly steel
Barrel: 4140 Chromemoly – 18, 22, and 29 inches – 1-15 twist
Scope mount: Aluminum with Picatinney rail profile mounted on receiver
Bolt body: Machined 4130 Chomemoly tubing
MUZZLE VELOCITIES:
18″ Barrel: 2283.57 fps
22″ Barrel: 2385.89 fps
29″ Barrel: 2561.91 fps
Average of 3 shots
Ammo used: Summit/French reloaded M33 Ball
Chronograph distance: 20 ft.
Weight of the upper only:
18″ Barrel: 11.5 lbs
22: Barrel: 12.0 lbs
29″ Barrel: 14.5 lbs